Tuesday, September 17, 2019

What are the common types of elevators?


When you think about an elevator, you usually think of an image that pushes a button, waits for the door to open, then steps into it and bubbles in the building.

Different types of elevators:

Hydraulic elevator:

We all know the basic the function of an elevator, which is to move people between the floors of a relative building.

Traditional hydraulic elevators: These are also known as pulleys, also known as pulleys, and tend to extend under the floor of the elevator pit. This pulley accepts a retracting piston when the elevator is lowered. There are various types of this elevator, called telescopic pistons, which are folded and require shallower holes. Home lifts

Hydraulic elevator without holes: In this variation, there are pistons on both sides of the car fixed to the bottom of the pit. There is no need for pulleys or lower holes as in the conventional configuration, and it can move up to 50 feet.



Rope Hydraulic Elevator: When moving the elevator with different ropes and pistons, these types of hydraulic elevators can travel a minimum distance of about 60 feet.

Traction elevators: 

These elevators are commonly used in high-rise buildings and other large facilities to transport people and cargo. These can be further classified as follows:

Geared traction elevator that uses worm gears to facilitate and control mechanical movement of the elevator.

A gear rest traction elevator that uses a drive sheave attached directly to one end of the motor, usually a low-speed elevator.

Pneumatic elevators: 

As the name suggests, these elevators use a vacuum and valves to move the car up and use air instead of vacuum to move down. However, these are low-capacity elevators and only about 3 people can ride a 525-pound passenger at the same time. 

Lift elevators: 

These are self-raising and will rise using their own propulsion. This propulsion can be achieved by a combustion engine or an electric engine. These types of elevators are typically used on towers or masts with columns so that they can be easily accessed for maintenance of various parts of the building.

Electromagnetic propulsion elevators: 

These cable-free elevators use electromagnetic propulsion to move the car. They are commonly used in high-density high-rise buildings.

Home elevators :

Also called house elevators or residential elevators. Home elevators are designed specifically for residences, villas and other private places. Because of superior performance, diverse installation solutions, and clearly decorated style elevator cars, the inconvenience, comfort and nobility when riding such elevators, changes in the living environment and life experience enjoy the amazing perfection. Looking Lifts for home

Shaft less elevator:

Shaft less elevators are gaining popularity in smart homes. This is an economical way to add an elevator to a two-story house. A shaft less elevator is considered a small residential elevator specially designed to fit your home. Also, shaftless elevators usually pass through holes to the balcony or floor and may or may not be suitable for wheelchairs.

Wheelchair lift:

A wheelchair lift elevator is a safe and easy means of transportation if you have a family with a disability, an elderly parent or parent relative, or a wheelchair passenger. It takes up less space and is more affordable than a traditional elevator. You can choose from a variety of wheelchair lift models based on the desired vertical travel distance. Residential lifts

Hydraulic Winch and Use in Marine Industry?


Hydraulic Winch :

Winches are used for many applications on vessels both large and small, such as anchor hoisting, mooring of the vessel, and subsequent holding of the ship against the quay. Hydraulic winches use fluid power, using a hydraulic system and a motor pump between the generator set and the winch. They use less energy than electric winches, so they are often used for vessels or vehicles that need to move very heavy cargo.

If you are looking to buy the most effective marine hydraulic winch on the market, there are numerous important considerations before purchasing such a winch. Even though there will vary brands of hydraulic winches currently available, each one of these goods is not top-quality. Winches are most commonly found in the maritime industry for anchor handling and towing purposes, ship-launch usage, and mooring winches.

Hydraulic Winch use in Marine Industry:

The hydraulic winch is important equipment of the marine industry that operates off with the hydraulic system of a vehicle and does not require a strong battery for smooth functioning. Hydraulic winches work underwater and are ideal for the marine industry.
A basic hydraulic winch offers great performance in cold climate for specific vehicle-mounted applications. Because of the power steering pump, the hydraulic fluid is pre-warmed before it is entered into the winch motor.

The marine hydraulic winch is ideally suited to heavy-duty marine applications to perform anchoring, towing, mooring operations as well as lifting and hauling heavy objects on board.



 Features of Hydraulic Winches:

 The hydraulic winch can work perfectly in the harshest marine environment. It can operate with complete power for a long time.

A general winch design will work best only when the engine of the vehicle is on. In some cases, its winch usage can be restricted considering this fact.

Hydraulic powered winch can be designed for the most challenging job on land and sea. It has a sturdy construction and long working life.

When the battery system of any vehicle has been considered in general, it is supposed to operate at a high-power for only a short period.

Better corrosion resistance. Utilizes a durable paint system to prevent it from corroding in a harsh marine environment. It can work perfectly when being submerged in water.

Noticing the reliable and durable nature of any hydraulic winch, it can be considered to work best for the vehicle-mounted winching system.

The hydraulic winch uses oil as the working medium, transmits the movement through the change of the sealing volume, and transmits the power through the pressure inside the oil.

(1) Power part - converts the mechanical energy of the prime mover into the pressure energy (hydraulic energy) of the oil, for example, a hydraulic pump.

(2) Execution part - converts the hydraulic pressure energy input from the hydraulic pump into the mechanical energy that drives the working mechanism. For example hydraulic cylinders, hydraulic motors.

(3) Control section - used to control and regulate the pressure, flow and flow direction of the oil, such as pressure control valves, flow control valves and directional control valves.

(4) Auxiliary part - The first three parts are connected to form a system for oil storage, filtration, measurement, and sealing. For example piping and fittings, fuel tanks, filters, accumulators, seals and control instruments. The pressure applied at any point on a volume of liquid.

Picking the ideal maritime hydraulic winch on the market is not always easy in the end. There are so many important things to consider in connection with this, and you can just get the best marine winch with good quality and reasonable price.


What are the types of wire rope hoists?


A hoist is a device used to lift and lower loads with a drum or lift wheel around which a wire rope or chain is wound. The actual lifting mechanism of a crane is commonly called a hoist, so the terms crane and hoist are somewhat interchangeable.
The hoist can be considered the most important component of an overhead crane. This is because the device actually performs the lifting and lowering of the load. The hoist can be considered the most important component of an overhead crane system. This is because the device actually lifts and lowers the luggage.
In our industry, you will definitely get the perfect and highest quality wire rope hoist. But getting the best wire rope hoist or winch is not enough. You need to know how to get the most out of this machine. This will help the industry grow and explore.
The electric wire rope hoist is driven by an electric motor in order to easily lift heavy objects. In addition, it is very safe and convenient. About 80% of companies use wire rope hoists instead of manual hoists because of their convenience. There are many wire rope hoist manufacturers in India, offering high-quality wire rope hoists all over the world.



Hoist types:
A hoist can be defined by two main characteristics:
Lifting medium (wire rope or chain) used to support the load
Power supply used to perform the lift (manual / manual, electric, or pneumatic).
Chain hoist:
The chain hoist uses a metal chain as a lifting medium, pulls the chain through a sprocket, and then stacks it in a container.
Wire rope hoist:
A wire rope hoist uses a wire rope as a lifting medium and wraps a wire rope cable around a grooved drum. Wire rope hoists can be driven manually, electrically or pneumatically.
Manual hoist:
Manual hoists can be designed in either a chain or wire rope configuration and are primarily used for lifts where lift speed is not critical. One chain is used to raise and lower the load, and the other chain is used to support the load. The chain is pulled using handover hand motion, or a handheld lever or ratchet, rotates the gear in the hoist and places the chain in the chain basket.
 Electric hoist:
Electric hoists can be designed to use a chain or wire rope, and an electric motor is used to rotate the gear in the hoist to raise or lower the load. The electric hoist is controlled by push button pendant or radio control. Typically, the electric hoist is wired to the crane's electrification system and utilizes 220v / 440v or 230v / 460v. Lightweight electric hoist uses 110v and can be plugged directly into a standard outlet. Looking For Electric wire rope hoist
Air hoist:
Air hoists are ideal for industrial and heavy-duty production environments and offer exceptional performance in high-speed, heavy service environments with constant start and stop. They have high lifting capacity (up to 100 tons) and are not affected by high heat environment. Air hoists are frequently used in explosion-proof environments and can be configured to be fire resistant using brass or stainless steel parts.

Friday, August 30, 2019

Different type of EOT cranes?


The EOT crane means an electric overhead crane also called a bridge crane that consists of a runway that runs parallel to the gap bridge and is a bridge crane that is widely used in most factories. An EOT crane is a machine used to transport materials from one location of a workshop or construction site to another. 

EOT crane types:

Double girder EOT crane:

Double girder EOT crane, double girder electric overhead travelling crane. A form of double girder EOT crane running on two parallel overhead tracks of a single span flat slab bridge. Double girder EOT cranes usually consist of three parts: mechanical, electrical and metal structure. Looking For EOT Crane Manufacturer

Overview of Double Girder EOT Crane:

Double girder EOT cranes can only be used in the following conditions are met:
• Lifting capacity: 15-50 feet
• Maximum span: 20-80 feet
• Lifting capacity: 5 to 100 tons
• Long moving speed: 350 fpm
• Crossing speed: 150 fpm
• Hoisting speed: 60 fpm

 Single girder EOT crane:

The single girder has a single girder with a trolley and hoist that run along the axis of the beam. Single-running bridge crane systems, whether top-running or under running, offer the advantages of economic cost and weight reduction compared to equivalent double girders. It can also be installed faster.

Overview of single girder crane:

A single girder crane can be used only if the following conditions are met.
• Lifting capacity: 15-50 feet
• Maximum span: 20-50 feet
• Lifting capacity: 1 to 15 tons
• Long moving speed: 200 fpm
• Crossing speed: 100 fpm
• Hoisting speed: 10-60 fpm


EOT cranes are widely used in several areas such as indoor and outdoor warehouses, factories, heads, and outdoor material storage yards. EOT cranes are important tools and equipment in modern industrial production and transportation and production processes.

What are the Essential Welding Tools used in Industries?


Welding equipment used to weld or joint two metals or alloys together using another metal component as filler. Whether you’re interested in welding as a career or as a hobby, you’re probably wondering how you can get started without breaking the bank then review our welding tools list. 

Welding Tools:

A welding table or a workbench:

Welding on the ground is impractical, uncomfortable, and may even put your safety at risk. Before you start a welding project, you need to find a solid surface to work on. Whether that’s a traditional workbench or a dedicated welding table, that’s up to you, but don’t skimp on this. Find Welding Booms from Best Manufacturers 


Welding Clamps:

This is an absolute must-have welding tool. Welding clamps allow you to firmly set up your workpiece, so the welding will produce a tight joint. Clamps come in many different sizes. It’s best to have at least 10 clamps, so you’ll always have one ready for the project at hand.

Welding Magnets:

Another essential for welding projects is the magnet. Using them, you can set up your metal pieces to hold at a variety of angles, such as 45, 90 and other. They also come in different sizes, so you can get a few of them to always be available for different project needs.

Wire and Electrode Feed:

Depending on the type of welding you’ll be doing, you’ll be using either a wire or electrode feed. Wire feed is used in TIG welding because the electrode is non-consumable. MIG welding uses consumable electrodes but also uses wire feed. However, stick welding uses electrodes. Stick welding, however, uses the electrode. Looking For Welding Rotators Manufacturers.

Measuring Tools:

When it comes to welding, every measurement needs to be precise and that requires using dedicated measuring tools. Depending on your project and your preference, this usually means anything from measuring tape, callipers, framing squares or metal rulers. I prefer to use a digital calliper whenever possible since I find it the easiest and most precise measuring tool, but anything else that fits the mantra of “measure twice, cut once” is a good option

Safety Equipment:

Due to the temperature and elements involved, welding is highly dangerous and can be lethal if handled incorrectly. Before you touch a welding setup, wear a welding helmet that protects your eyes, earplugs, solid boots to protect your feet from sparks or slag, welding gloves to protect your hands and leathers to cover the rest of your body. Do not weld without these, as you will likely get hurt. Get Quote for Welding roller

Advantages of gantry cranes | Aacess Equipments


Gantry cranes are very useful at construction sites. They can be used to lift heavy material present in these areas.

Advantages of gantry cranes:

Purchasing a gantry crane has several advantages.
• Complete mobility
• Quick assembly using bolted components
• Versatile
• Easy customization
• Power drive kit available

Gantry cranes are commonly used in general industries for machine contractors, power generation facilities, water treatment facilities, HVAC applications, and metal processing facilities. Gantry cranes are highly required by industries that require heavy-duty transportation facilities. According to The Constructor, gantry girders are used to support overhead cranes in environments such as warehouses and construction factories.



Manufactured using high-quality materials, these indoor and outdoor industrial gantry cranes are valued for their durability and optimal performance. Clients can take advantage of our durable and reliable range at industry-leading prices.
According to The Constructor, gantry girders are used to support overhead cranes in environments such as warehouses and construction factories. In these environments, gantry girder cranes are used to move heavy machinery and equipment in the work area using manual or electronic cranes.
However, if you are looking for mobility and flexible height, span and tread, you need a gantry crane. Gantry cranes are not the best and most efficient lifting solution for all applications, but they are a multipurpose investment that is cheaper than a permanent solution. The proper investment will help a lot.

What are the Use’s Of Gantry Cranes?


A Gantry crane is one of many cranes that are attached to a hoist trolley and lift an object by a hoist that moves horizontally with a rail or pair of rails attached under the bean. Other equivalent cranes are bridge cranes and overhead cranes. The gantry crane consists of two upright members connected by an I-beam that acts as a trolley bridge. The gantry crane is either manual or electric.



Use of gantry cranes in the industry

Shipbuilding:

Gantry cranes are usually deployed in the shipbuilding industry. Shipbuilding requires a lot of heavy lifting and can be accomplished by using a gantry crane. The crane helps cross the ship and some of the huge engine parts like the ship's engine are installed in it. The crane helps the movement of the ship in the construction stage.

Automotive industry:

There are small cranes that can be used to lift the car engine from the vehicle. Although the weight of an automobile engine varies from vehicle to vehicle, it is important to have a crane that supports the entire lifting process.

 Warehouse:

In warehouses, it is always necessary to lift heavy objects. Gantry cranes can help with this lifting process. These types of cranes exist in almost all types of warehouses.

Production unit:

Small gantry cranes can be used in production units. Helps move parts from one location to another. These cranes have a capacity of 4 tons, which helps to carry bulk goods at the same time. Looking For Industrial Cranes

Construction area:

Gantry cranes are very useful at construction sites. They can be used to lift heavy material present in these areas.