A Gantry crane is a type of overhead crane that is similar to a bridge
crane in a single or double girder configuration supported on wheels or by
unsupported legs moving along a truck or rail system.
These are widely used when lifting is required without the cost of
construction or support of steelworks. The term "gantry crane" is
often used in the material handling industry.
Gantry cranes are usually considered when there is no reason to incorporate an overhead
runway system. Cranes use legs to support bridges, trolleys, and hoists. These
legs move on tires and rails embedded in the floor or ground. The gantry crane can lift heavy objects with
its hoist trolley and move horizontally over a pair of rails mounted below the
beans.
Designs are flexible because they can be designed to be mobile without
relying on building support. There are several points to consider when using a
gantry crane at your facility.
Here are some of
the gantry crane types listed:
1. Full gantry
crane system:
The full gantry crane system is the most common configuration, consisting
of two legs that ride on rails embedded flush with the top of the floor. These
cranes usually run straight only, especially in dedicated areas.
This design allows motorized equipment such as scissor lifts, forklifts,
carts, trucks to roll past it under the crane.
2. Semi gantry
crane system:
Gantry cranes can also be designed with one foot on the wheel, which is
advantageous if the working space is very small. This setup does not require
two runways to support the columns like a bridge crane.
3. Portable
Gantry Crane Systems:
Portable gantry cranes are smaller, lighter and move on rubber wheels or
castors. When the package is empty and empty, it can be moved or stored
throughout the store or in another work cell to save space and increase floor
space flexibility.
4. Adjustable
gantry crane:
These cranes can be designed
with variable height and span designs, enabling the user to adjust the crane
according to the requirements. When transporting the gantry system in and out
of the facility or through different locations in the store. Searching for EOT Crane Manufacturer
5. Rubber
fatigue gantry crane:
Usually, these cranes are moved with rubber tires. These cranes do not
need rails for movement. These are usually smaller than other gantry cranes
that allow rubber tires to handle their loads.
How to use
gantry cranes in the industry:
1. Gantry cranes are commonly used for heavy fabrication applications, or
in some types of outdoor yard-rail yard, shipping and container yard, steelyard, and scrap yard.
2. Gantry cranes are usually deployed in the shipbuilding industry.
3. There are small cranes that can be used to lift the car engine from
the car.
4. A small gantry crane can be used in a production unit. They help move
parts from one place to another. You should always lift heavy loads. These
cranes help lift the process. Also, search for Industrial Cranes
5. Construction area
Gantry cranes are very useful at construction sites. They can be used to
lift the heavy substances present in these areas.
No comments:
Post a Comment